Installation guide

Thank you for purchasing an umilumi lamp!

Now for the  important part … How to install your new lamp properly. Please follow the steps below carefully.

STEP 1: Determine the wall material

Included in the umilumi box you will find 3 Command Wall strips and 1 traditional dowel and screw. 

Use wall strips for:

– Painted walls
– Painted or varnished wood
– Concrete surfaces
– Tile
– Metal
– Glass
– Laminates
– Smooth solid surfaces 

Use dowel and screw for: 

– Wallpaper 
– Brick
– Textured walls
– Fabric 
– Other rough and non-stick surfaces 
How to hang wall lamp with wall strips

STEP 2: Prepare the wall

Use a clean cloth and rubbing alcohol to wipe the wall before hanging the lamp. Do not use household cleaners or water.

STEP 3: Locate the back of the lamp

Locate the touch sensor hole above the USB port. Make sure you apply the stickers to THE BACK of the lamp!

STEP 4:  Prepare the strips

Separate the strips and click them together.

STEP 5: Stick the strips on

Remove one side of liners. Stick on the back of the frame as shown. Press firmly!

STEP 6: Peel of the liners

Remove all the remaining liners.

STEP 7: Mount to wall

Locate the USB port and make sure it is level with the wall. Once you are happy with the placement press the lamps firmly to the wall.

Thank you for watching! For mounting the wall lamp with the dowel and screw we recommend you call a professional handyman in your local area.